The HW-N18-1F enclosure is a rugged, larger sized (18″ x 16″ x 8″) weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The box can also be pole mounted with the optional pole mounting hardware kit. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The enclosure material is UV stabilized and comes in machine tool gray.
The HW-N18-1F is ideal for custom applications, which may require special modifications to the enclosure. Mounting stand-offs inside the enclosure can be used for mounting plates.
The plate features four standard surge protected 120 VAC outlets and a terminal strip to supply power to internal equipment.
To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Cooling Fans, internal temperatures can be better
maintained. This model is ideal in hot environments.
The HW-N18-1F includes two thermostat-controlled 12W (24W total) fans. The high airflow, low noise fans used allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fans turns on when the internal temperature rises to 120° F (49° C) ±5° and turns off at 90° F (32° C) ±10°. These cooling fans do not require the use of any of the AC outlets, leaving them all available for your equipment.
Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs.
- Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
- Stainless steel quick release latches with padlock hasps
- NEMA Type 3R, 3RX / IP24 rated
- Fully gasketed raised Vented lid with removable filters & integral mounting flange
- Features aluminum mounting plate with surge protected duplex 120 VAC Outlets & Thermostat Controlled Cooling System
|Enclosure Material:||Fiberglass Reinforced Polyester|
|Enclosure Color:||Machine Tool Gray|
|Fan Power:||12 Watts each (24 Watts total)|
|Mounting Plate Material:||.10 in. (2.5mm) Thick Anodized Aluminum|
|Mounting Plate Dimensions:||16.8×14.8 inches (42.6 x 37.5 cm)|
|Weight:||20.3 lbs (9.2 kg)|
|Outside Dimensions (max):||19.5 x 17.5 x 10 inches (49.5 x 44.4 x 25.4 cm)|
|Inside Dimensions:||17.7 x 15.7 x 8.5 inches (44.9 x 39.9 x 21.6 cm)|
|Flame Rating:||UL 94-5V|
|Cable Feed:||1/2” Cable Conduit Connector|
|Ratings:||NEMA Type 3R; 3RX / IP24|